Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org
DISCLAIMER:
The Independent Living Centres Australia Inc does
not sell this equipment, but provides this information as a community service.
Details and prices are provided by the equipment supplier and are subject to
change without notice. The provision of this information does not constitute
a recommendation. Responsibility for final selection of any item rests with
the individual.
Floorsafe Anti Slip Solutions
ILC Reference NO 81:38:001
Item sourced from ILC VIC database
Short Description
An Australian manufactured product that provides a slip resistant treatment for ceramic and terracotta tiles, terrazzo and concrete. The treatment is not a coating but a wash applied in three steps that alters the surface to provide grip in wet conditions. Suitable for internal or external wet areas.
More Details
Method of Use by Trained Personnel
First application is sprayed on to loosen dirt which is then removed.
Second application is added immediately. During this step the floor surface is micro etched and then tested for slip resistance.
Third solution is added and brushed over. The area is then washed to neutralise the solutions used.
Features and Options
Can be walked on immediately after use.
Bath and Shower safe is an application for use on the base of a bath or shower.
A video or CD of the application technique is available from the supplier.
The supplier states the products do not contain harmful fumes or odours.
Commercial and domestic maintenance cleaners can be obtained from the supplier.
Floorsafe Anti Slip Solutions has been tested and documentation sighted to comply with the requirements of AS/NZS 3661.1.
Demonstration
A DVD and video are available at the Independent Living Centre to view this item in detail.
Warranty
2 years for commercial applications.
3 years for domestic applications.
Safety and Maintenance
Refer to the supplier and manufacturer for maintenance instructions and safety details.
Test results for compliance with Australian Standards only apply to the specimens tested and for the individual situation slip resistance needs to be checked for standards compliance.
Standards
AS/NZ 3661.1: 1993 Slip resistance of pedestrian surfaces
AS/NZ 3661.2 1994 Guide to the reduction of slip hazards
AS/NZS 4586 :1999 Slip resistance classification of new pedestrian surface materials
For some types of equipment, specific Standard(s) are applicable to the materials used in, the manufacturing processes applied to and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard (s).
Place of Manufacture
Floorsafe Anti Slip Solutions (Australia)
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp.
Price Guide
Refer to supplier details for pricing
Supplier Information
Name: Slippery Solutions
Price: POA
Address:
10 Campaspe Mews
Strathdale
VIC 3550
Phone: Mob 0418 417 577
FAX: (03) 5441 7159
Email: slipperysolutions@iprimus.com.au
Name: The Floor Safety Centre Pty Ltd (formerly Floorsafe)
Price: POA
Address:
164 Rosebank Avenue
Clayton South
VIC 3169
Phone: (03) 9546 4777
FAX: (03) 9546 4755
Email: floorsafety@hotmail.com
Website: www.floorsafetycentre.com.au
Additional Images
No additional Images apply to this item