Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org
DISCLAIMER:
The Independent Living Centres Australia Inc does
not sell this equipment, but provides this information as a community service.
Details and prices are provided by the equipment supplier and are subject to
change without notice. The provision of this information does not constitute
a recommendation. Responsibility for final selection of any item rests with
the individual.
Biovations 770H Infra-Red Over Door Alert System
ILC Reference NO 61:59:029
Item sourced from ILC VIC database
Factors to Consider
This system is an aid only and does not replace adequate supervision.
Ensure that any cords and leads are secured as trailing leads can create a trip hazard.
Short Description
A wandering person alarm system that alerts a carer when someone is trying to go out of the door. Infrared detectors are mounted above the doorway and once movement is detected, a buzzer or a strobe light is activated. Other options are available. Designed for healthcare facility use.
Price Guide
Refer to supplier details for pricing
More Details
Components
Control box which houses the receiver, call input and alert system circuit board needs to be connected to a mains power supply.
Power pack which connects the control box to the mains power supply.
A surface mount passive infra-red (PIR) detector mounted to a transmitter box.
Power
Control box needs to be connected to a 240V mains power outlet at all times.
Requires installation of a power point above the top of the door.
Power backup of up to 3 hours in case of a power failure.
Activation
Can be interfaced with an existing nurse call system.
Alarm can be set to trigger prior to the person crossing the door threshold.
When alarm is triggered an alert will be sent to the call screen or to a pager.
Models
Only one model available.
Method Of Use
Door sensor needs to be mounted at the top of the doorway.
Control box can be situated where carer is usually located or within hearing or visual range.
The alarm is activated once movement is detected close to the doorway.
To turn off the alarm, carer has to turn off the switch in the control box.
The control box needs to remain off for 10 secs before turning it on again to restore its settings.
Installation
Do it yourself installation.
Mount the sensor supplied with double sided tape above the doorway.
The control box can be located where the carer is primarily situated or within the hearing and visual range of the carer.
Dimensions
Biovations 770H
Overall Width..................................... Unknown
Overall Height.................................... Unknown
Overall Weight (gms).............................. Unknown
Range (mtr)....................................... 12 mtr
Warranty
12 month warranty.
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see www.ilcaustralia.org/explanationofstandards.
Place Of Manufacture
Victoria (Australia).
Supplier Information
Name: Biovations PTY LTD
Price: $795.00 + GST
Date: 10/06/2009
Address:
PO Box 121
Sandown Village
VIC 3171
Postal Address:
PO Box 121
Sandown Village
VIC 3171
Phone: 03 9561 6681
Mobile: 0417 543 678
Toll Free: 1800 506 609
Email: biovations@optusnet.com.au
Website: www.biovations.com
Additional Images
No additional Images apply to this item