Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org


DISCLAIMER:
The Independent Living Centres Australia Inc does not sell this equipment, but provides this information as a community service. Details and prices are provided by the equipment supplier and are subject to change without notice. The provision of this information does not constitute a recommendation. Responsibility for final selection of any item rests with the individual.

Aquatec Orca Bath Hoist

ILC Reference NO 44:20:005
Item sourced from ILC VIC database

Aquatec Orca Bath Hoist

Short Description
A battery operated, portable, folding bath hoist which lowers and raises a person in a seated position into a bath. The hoist can be operated by an attendant or by the user. The bath hoist is suitable for domestic use.

More Details
Frame
The bath hoist is made of two detachable components, the back support and the seat base.
The two attach together by the backrest locking onto the seat base.
The bath hoist is positioned in the bottom of the bath and attached with 4 large suction caps.

Seat
The bath seat has wide side flaps which are hinged and fold upwards as the seat lowers.
The seat is covered in detachable, antislip covering which can be removed and machine washed.

Backrest
The backrest has a recline function which is electrically operated by the hand held control.

Power Source
Via a battery that is found at the back of the chair.
A red light shows when the battery power is low.
The hoist is powered by a rechargeable battery which is charged after each use.
There is a power back up mechanism, allowing the seat to be raised when the battery is low.

Battery Recharging
Achieved by disconnecting the battery from the bath hoist and inserting the battery into the charging terminal.

Electric Controls
The bath hoist is lowered and raised by the user or attendant using a hand held control that is buoyant should it be dropped in water.
Handheld control on an extendable cord.
A hook attachment on the control unit allows the controls to be hung on the battery attachment on the backrest.

Dismantling/Folding
Is possible by folding the backrest down and unlocking the seat from the base.


Factors to Consider
It is recommended that prior to using this product, training in manual handling and the correct use of assistive devices should be undertaken.



Options
Battery
Charger
Seat cover
Backrest cover


Dimensions
Orca Bath Hoist
Seat Width........................................ 375 mm Without outside flaps.
Seat Width........................................ 715 mm With outside flaps.
Seat Depth........................................ 490 mm
Seat Height....................................... From 60 mm to 420 mm
Backrest Width.................................... 360 mm
Backrest Height................................... 665 mm
Backrest Angle.................................... From 90 degr to 140 degr
Width of Base..................................... 285 mm
Length of Base.................................... 580 mm
Load Capacity (supplier stated)................... 135 kg
Weight (kg)....................................... 12.5 kg Including battery.


Place of Manufacture
Aquatec (Germany).

Warranty
3 year warranty, excluding batteries and wearable parts.

Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp





Price Guide
Refer to supplier information for pricing details.



Supplier Information
Name:  MobilityCare (formerly Microsafe Australia)
Address:
  Unit 1
  12 Marriott Street
  Oakleigh
  VIC  3166

Postal Address:
  Unit 1
  12 Marriott Street
  Oakleigh
  VIC  3166

Phone:   (03) 9568 8383
Mobile:  0438106867 (Rory)
FAX:  (03) 9568 5114
Email:   info@mobilitycare.net.au
Website:  www.mobilitycare.net.au
Notes:
  Hours of opening: 9am to 5.30pm Mon - Fri, Sat. by appointment
   Delivery usually ex-stock
   Delivery cost depends on product and destination 
  


Name:  Scooters Australia Pty Ltd - Dandenong
Address:
  Unit 4
  355 South Gippsland Hwy
  South Dandenong
  Vic  3175

Postal Address:
  Unit 4
  355 South Gippsland Hwy
  South Dandenong
  Vic  3175

Phone:   (03) 9799 9077
FAX:  (03) 9799 9177
Toll Free:  1800 622 633
Email:   dandenong@scootersaus.com.au
Website:  www.scootersaus.com.au
Notes:
  Opening hours;
   8.30am - 5.00pm Monday -  Friday
  


Name:  Scooters Australia Pty Ltd - East Geelong
Address:
  13 Ormond Rd
  East Geelong
  VIC  3219

Postal Address:
  13 Ormond Rd
  East Geelong
  VIC  3219

Phone:   (03) 5229 3111
FAX:  (03) 5229 3903
Toll Free:  1800 622 633
Email:   geelong@scootersaus.com.au
Website:  www.scootersaus.com.au

Name:  Scooters Australia Pty Ltd - Shepparton
Address:
  4 Campbell Street
  Shepparton
  VIC  3630

Postal Address:
  4 Campbell Street
  Shepparton
  VIC  3630

Phone:   (03) 5831 7317
FAX:  (03) 5831 5671
Toll Free:  1800 622 633
Email:   fiproducts@bigpond.com
Website:  www.scootersaus.com.au


Additional Images
No additional Images apply to this item