Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org

DISCLAIMER:
The Independent Living Centres Australia Inc does not sell this equipment, but provides this information as a community service. Details and prices are provided by the equipment supplier and are subject to change without notice. The provision of this information does not constitute a recommendation. Responsibility for final selection of any item rests with the individual.

Breha Range of Work Chairs and Stools

ILC Reference NO 41:24:002
Item sourced from ILC VIC database

Breha Tray Stools

Short Description
Range of metal framed height adjustable chairs and stools. Backrests and seats consist of moulded polyurethane . Models in the range include the C662C, C662B, C661 and C661A chairs; and the C636 and C637 stools. Certain models incorporate optional features including synchrotilt mechanism backrest, height adjustable footring legrest, vinyl upholstery, and armrests.



More Details
Models in range
C662C Work chair
Metal base on glides, nylon base on glides or castors, or deluxe metal base on castors.
Fixed height foot ring.
Spring action back or syncrotilt.
Polyurethane seat and back.

C662B Work chair
Metal base on glides.
Choice of two gas lift mechanisms.
Fixed height foot ring.
Adjustable back.
Vinyl upholstery.

C661A Work chair
Plastic base on castors.
Spring action back or syncrotilt.
Polyurethane seat and back.

C661 Work chair
Chrome base on castors.
Spring action backrest or synchrotilt.
Polyurethane seat and back.

C637 Work stool
Metal or plastic base on glides.
Fixed height 380mm foot ring.
Optional Tilting plate for Stay aid seat.

C638 Work Stool
Metal or plastic base on castors.
4 degree Plate.

Methods of adjustment
For seat height a gas lever is located beneath right side of seat.
Seat to backrest angle, optional synchrotilt lever is located under right side of seat. The backrest has spring action pivot. A knob at base of backrest support column alters recoil tension and locks position.
For backrest height, manually loosen knob at rear of backrest and or backrest support column base, relocate at desired height and retighten knob..

Models
C638 Stool
C662B
C662C Workchair
Work Chair

Dimensions
C638 Stool
Seat Height....................................... 260 mm

C662B
Seat Height....................................... From 470 mm to 670 mm

C662C Workchair
Seat Height....................................... From 540 mm to 780 mm

Work Chair
Seat Width........................................ From 460 mm to 830 mm
Seat Depth........................................ From 420 mm to 830 mm
Seat Height....................................... From 470 mm to 450 mm
Seat Rear Height.................................. From 470 mm to 570 mm
Seat Front Height................................. From 470 mm to 570 mm

Place of Manufacture
Breha Industries (Australia)

Warranty
36 months

Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Price Guide
Refer to supplier details for pricing.



Supplier Information
Name:  Breha Industries Pty Ltd
Price:  POA
Address:
  27 Treforest Drive
  Clayton
  VIC  3168
Phone:   (03) 9562 6277
FAX:  (03) 9562 6163
Email:   breha@micronica.com.au


Additional Images
No additional Images apply to this item