Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org
DISCLAIMER:
The Independent Living Centres Australia Inc does
not sell this equipment, but provides this information as a community service.
Details and prices are provided by the equipment supplier and are subject to
change without notice. The provision of this information does not constitute
a recommendation. Responsibility for final selection of any item rests with
the individual.
Freedom Motors Vehicle Modification Services
ILC Reference NO 51:02:008
Item sourced from ILC SA database
Short Description
This company modifies vans and vehicles to suit both drivers with disabilities and to transport occupants sitting in wheelchairs. Suitable for private or commercial use. A full range of services including vehicle hire are available.
Price Guide
Refer to supplier information for pricing details.
More Details
Conversions can be made on a wide range of vehicles including:
Chrysler Grand Voyager
KIA Grand Carnival
Toyota Tarago
Mercedes Benz Vito
Honda Jazz
Citroen Berlino
Renault Kangoo
VW Multivan
VW Caddy
VW Caravelle/Transporter
It may be possible to modify other vehicles upon request.
Wheelchairs can be attached to the vehicle via the Freedom Auto Dock system, which is suitable for use with most powered wheelchairs. The docking system operated by driving or pushing the wheelchair into the device. A beeping sound will confirm when the wheelchair is locked into position. To release the docking system, push the release button and a beep will confirm the release mode.
Models
The following rear entry modification designs are available:
Two Seater
- wheelchair can roll up to the back of the driver/passenger seats.
- seating: 2 passengers + 1 wheelchair
4 passengers (with optional double fold down seat)
Family
- wheelchair can roll through the middle of the vehicle.
- wheelchair can be positioned between the two single modified rear passenger seats.
- seating: 4 passengers + 1 wheelchair
6 passengers (with optional double fold down seat)
Passenger
- wheelchair can roll up to the back of the second row of passenger seats.
- choice between leaving the original bucket seats in their original position or moving the third row three seater forward.
- seating: 4 passengers + 1 wheelchair
6 passengers (with optional double fold down seat)
5 passengers + 1 wheelchair
7 passengers (with optional double fold down seat)
Two Wheelchair
- two wheelchairs can roll up the centre of the vehicle, one behind the other.
- this design is only possible with the larger van-type vehicles.
- seating arrangements for other passengers are flexible.
Self Drive
- suitable for situations where both the wheelchair occupant and/or other persons will be driving the vehicle.
- the wheelchair occupant must be able to transfer from the wheelchair to the drivers seat.
- for the wheelchair occupant, the following items have been added to the standard conversion:
1. rear door and ramp auto-entry system, remote controlled.
2. automatic wheelchair docking system (to lock the wheelchair to the floor of the vehicle).
3. power driver transfer drivers seat (forwards and backwards
movement).
4. hand assisted driving control system (push pull handle, self cancelling indicator, flip-up accelerator pedal and knob).
Wheelchair Drive
- suitable for wheelchair occupants who cannot transfer to a driver's seat.
- enables the wheelchair occupant to sit in the wheelchair in the driver's position.
- for the wheelchair occupant, the following items have been added to the standard conversion:
1. rear door and ramp auto-entry system, remote controlled.
2. automatic wheelchair docking system (to lock the wheelchair to the floor of the vehicle).
3. hand assisted driving control system (push pull handle, self
cancelling indicator, flip-up accelerator pedal and knob).
Additional Comment
Inspections of Modifications
In South Australia modifications to a vehicle must be inspected and approved by Transport SA.
Driver's License Requirements
A driver who has an illness or disability which affects their ability to drive is required to provide Medical Records at the Motor Registration Division with a certificate from their Doctor stating that they are fit to drive.
An assessment is arranged to establish that they have the physical ability to drive and what modifications are recommended. Further training may be necessary and a reassessment when the person can demonstrate their ability to handle the vehicle safely with the modifications.
The license is then issued with the appropriate restrictions regarding type of vehicle and modifications required. Insurance companies should also be notified to ensure continued indemnity.
Warranty
All conversions are covered by a 3 year/60,000km warranty. Standard vehicle warranties are not affected by the conversions.
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
Vehicles are modified in New South Wales.
Supplier Information
Name: Freedom Motors Australia Pty Ltd
Price: Price on Application
Date: 27/05/2008
Details: Payment Terms:
10% non-refundable deposit with order
4% on or before start date of conversion
50% balance on completion
100% if ordering a vehicle with a conversion package
Address:
17 Plasser Crescent
St Marys
NSW 2760
Postal Address:
17 Plasser Crescent
St Marys
NSW 2760
Phone: (02) 9673 4033
FAX: (02) 9673 4264
Toll Free: 1800 672 437
Email: sales@freedommotorsaustralia.com.au
Website: www.freedommotorsaustralia.com.au
Additional Images
No additional Images apply to this item