Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org
DISCLAIMER:
The Independent Living Centres Australia Inc does
not sell this equipment, but provides this information as a community service.
Details and prices are provided by the equipment supplier and are subject to
change without notice. The provision of this information does not constitute
a recommendation. Responsibility for final selection of any item rests with
the individual.
Lift 'n' Scoot Wheelchair And Scooter Lifter
ILC Reference NO 51:23:006
Item sourced from ILC SA database
Short Description
A steel frame, vehicle mounted electronically operated lifter for a powered wheelchair or scooter. Designed to lift a wheelchair or scooter into the back of a van or station wagon. Available in a range of models.
Price Guide
Refer to supplier information for pricing details.
More Details
This epoxy coated steel lifter is anchored to the rear floor surface or a van or station wagon. It is suitable for use with most vans and station wagons.
This lifter is installed to connect to the car or van motor and does not require charging.
The lifter attaches to a wheelchair or scooter via two adjustable lifting straps with clasps which attach to anchor points which needs to be installed on the wheelchair or scooter.
The controller is located on an extendable cord and features push button operations for vertical, horizontal, left, right, in and out functions (depending on the model).
Method Of Use
1. Open the rear doors or tail gate to allow access.
2. Park wheelchair/scooter as close and parallel to the rear bumper as possible. The direction that it faces will depend if it has to go into the vehicle forwards or backwards.
3. Hold the control panel and swing the Lift 'N' Scoot out as far as it will travel by pressing the LEFT button.
4. Lower the arm by pressing the DOWN button so it is close enough to be connected to the lifting points on the wheelchair/scooter and hook up the lifting straps accordingly.
5. Put the wheelchair/scooter into freewheel and disengage manual parking brakes so it can be moved easily by hand. Raise the wheelchair/scooter by pressing the UP button to a point above the rear floor of the vehicle. This may be achieved by using both UP and OUT operations simultaneously.
6. Once at the appropriate height, swing the wheelchair/scooter in to the back of the vehicle by pressing the RIGHT button.
7. Lower and/or retract the Lift 'N' Scoot so the weight of the wheelchair/scooter rests on the vehicle floor.
8. Slight manual manoeuvring may be required to push the wheelchair/scooter back far enough to close the rear door(s).
9. Place the controller back in it's resting place and close the rear door(s).
Models
Stage 1 Electric Lift
Push button operation for electric lift function with manual swing and extend.
Stage 2 Electric Lift & Swing
Push button operation for electric high and low lift and swing functions with manual extend.
Stage 3 Electric Lift, Extend & Swing
Push button operation for electric lift, swing and extend functions.
Dimensions
Lifting capacity........120kg
Warranty
12 month warranty
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
Adelaide, South Australia.
Supplier Information
Name: Les Brazier Special Vehicles
Price: $2700.00 - $4200.00
Date: 27/08/2009
Details: Price does not include fitting costs.
Address:
8 Barfield Crescent
ELIZABETH WEST
SA 5113
Postal Address:
PO Box 14
Mail Centre
ELIZABETH WEST
SA 5113
Phone: (08) 8255 1947
Mobile: 0419 241 977
FAX: (08) 8252 3442
Email: info@lesbrazier.com.au
Website: http://www.lesbrazier.com.au
Additional Images
No additional Images apply to this item