Independent Living Centres Australia Inc
infoline: 1300 885 886
web: www.ilcaustralia.org
DISCLAIMER:
The Independent Living Centres Australia Inc does
not sell this equipment, but provides this information as a community service.
Details and prices are provided by the equipment supplier and are subject to
change without notice. The provision of this information does not constitute
a recommendation. Responsibility for final selection of any item rests with
the individual.
Pelican Car Seat Slide Pad
ILC Reference NO 51:21:012
Item sourced from ILC SA database
Short Description
A transfer device consisting of two sliding fabric pads which are placed on a car seat. Designed to assist the user to get in and out of a car.
Price Guide
Refer to supplier information for pricing details.
Features
The transfer device consists of two rectangular pads with rounded corners. The inner layers of both pads are made of a low friction nylon material that enables the pads to slide across one another. The outer layer of the bottom pad is a slip resistant vinyl while the outer layer of the top pad is foam and velour. On the upper pad there are loops for hand grips.
When traveling, the slide pads can be attached to the car seat backrest via a webbing belt for stability.
Method Of Use
Designed to enable the user to slide more easily onto a car seat, turn themselves around and lift their legs into the car. If assistance is required, the attendant can use the webbing positioning handles to assist the user to turn around and face the front.
To use, place the bottom pad well back on the seat with the joining strap central at the back. Turn the top pad sideways to the side of the seat so that the pad is central under the user's hips. Once the user has turned around and is facing the front, fasten the buckle of the top pad around the back of the car seat to ensure that the pad does not slide forward.
Models
Only one model available.
Dimensions
Top pad
Width.......570mm
length......570mm
Bottom Pad
width.......570mm
length......500mm
Cleaning Requirements
Hand or machine wash up to 80 degrees Centigrade.
Air dry or cool tumble dry.
Caution
When travelling in a vehicle this device should always be used with a seat belt.
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
Western Australia
Supplier Information
Name: Pelican Manufacturing Pty Ltd
Price: $95.00
Date: 11/02/2009
Details: Supplier reference no: 504P
Address:
Pelicans Nest
7 Ruse Street
OSBORNE PARK
WA 6017
Postal Address:
Pelicans Nest
7 Ruse Street
OSBORNE PARK
WA 6017
Phone: (08) 9444 4577
FAX: 1800 641 477
Toll Free: 1800 641 577
Email: sales@pelicanmanufacturing.com
Website: www.pelicanmanufacturing.com.au
Additional Images
Click Thumbnail to view larger image.