NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Baribunma Electric Wheelchair
ILC Reference NO 43:42:095
Item sourced from ILC VIC database
Factors to Consider
Suitable for use in variety of vehicles (as passenger or driver) with minimal or no modification required to vehicle and can be used on public transport and aircraft.
Short Description
A front wheel drive powered wheelchair that is specifically designed to fit the driver and/or passenger seating positions in appropriate vehicles. The seat height and rake are adjustable enabling the wheelchair to access a van and also to lower to floor level. It can be used indoors and outdoors. Any seating requirements can be mounted including any approved automotive seat.
More Details
Frame
Rigid steel frame with checker plate panels beneath seat.
Rear suspension maintains two drive wheels in contact with the ground at all times.
Seat
Contoured Kia vehicle seat, high density foam.
Other seating systems can be mounted including other approved vehicle seating.
Tilt in space interface can be accommodated.
Upholstery
Velour
Backrest
Contoured Kia vehicle seat, high density foam.
Angle adjustable using left or right sided lever.
No push handles as it is a car seat.
Other backrest seating can be mounted.
Headrest
Car seat style headrest.
Other headrest can be mounted as per seating system selected.
Arnrests
Lift up.
Full length.
Other armrests can be mounted as per seating system selected.
Legrest
Separate
Footplates
Two piece, lift up footplates with heel loops.
Position of footplates change according to height of wheelchair.
Wheels
Front wheels are large foam filled tyres.
Rear wheel suspension to maintain vertical casters.
Castors
Rear swivel microcellular castors.
Controls
Dynamic DX Joystick
Batteries
Two sealed gel batteries 35 amp/hr.
One is located between the front wheels.
Other battery is in checker plated box on the rear of the wheelchair base.
Motor
Motor disengagement: freewheeling hubs on the front wheels.
Brakes
Manual & electric braking mechanisms.
Transport
Tie down points.
The wheelchair automatically locks onto the purpose made floor mounted tracks.
It is released from the tracks by pulling a long handled side mounted lever.
For transporting in the hold of an aeroplane, remove footrests, lift up armrests and fold backrest onto seat. It fits through the standard door to be carried in the hold of the plane.
Customisation
Any form of seating system can be mounted.
Accessories
Seatbelt feature to allow use of standard vehicle seatbelt.
Off board charger.
Models
Only one model available, however any seating can be mounted.
Dimensions
Baribunma
Seat Width........................................ From 420 mm to 520 mm, Can be customised. Based on Kia seat
Seat Depth........................................ 480 mm, Can be customised. Measurements based on the Kia seat
Seat Front Height................................. From 360 mm to 560 mm
Backrest Height................................... 620 mm, Can be customised. Seat base to top of backrest
Overall Width..................................... 610 mm
Load Capacity (supplier stated)................... From 0 kg to 135 kg
Standard
Backrest Width.................................... 490 mm, Can be customised.
Backrest Height................................... 620 mm, Can be customised.
Clearance Under Base.............................. From 170 mm to 405 mm
Overall Length.................................... From 1050 mm to 1200 mm Depends on whether wheelchair is raised or lowered
Warranty
5 years limited warranty.
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see www.ilcaustralia.org/explanationofstandards.
Place Of Manufacture
Baribunma Holdings Pty Ltd (NSW)
Supplier Information - click to supplier for contacts details
BARIBUNMA MOBILITY SYSTEMS,
PEAKHURST, NSW
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
