NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Denyers One Arm Drive Wheelchair Conversion Kit
ILC Reference NO 43:25:001
Item sourced from ILC VIC database
Factors to Consider
To propel and guide the chair, the user requires intact perceptual abilities, good concentration and reasonable strength in the arm that will propel the chair.
Very difficult to propel up a hill and over rough ground.
Short Description
One arm drive conversion kit that will fit onto the Vector manual wheelchair. The kit consists of two rear wheels connected by a concertina style drive shaft. One rear wheel has a dual rim to drive the wheelchair that can be attached to either the left or right side. The kit can be bought on its own, model A 993A, or with the Vector chair in lieu of standard wheels.
Price Guide
Refer to supplier details for pricing.
More Details
Drive wheels
Pneumatic or solid rubber tyres.
Double hand rim on either left or right side.
Quick release hubs are not available.
Brakes
Extension handle would need to be added to side opposite double rimmed wheel.
Attachment of Conversion Kit
To attach kit, first detach original rear wheels.
Then slide a lower bracket from the kit onto the bottom strut of the frame of the wheelchair.
Secure by aligning the upper bracket to where the original wheels were and pass a bolt through this tube.
Accessories/options
Drive wheels
Puncture proof tyres
Left or right hand operation.
Brakes with brake extension
Models
Vector one arm drive
Dimensions
Vector one arm drive
Seat Width........................................ From 355 mm to 455 mm
Seat Depth........................................ 420 mm
Seat Height....................................... 520 mm
Seat Rear Height.................................. 520 mm
Seat Front Height................................. 520 mm
Backrest Height................................... 415 mm
Backrest Height (from seat)....................... 415 mm
Seat to Top of Backrest........................... 415 mm
Armrest Height (from seat)........................ 210 mm
Overall Width..................................... From 620 mm to 720 mm
Overall Length.................................... 1140 mm
Overall Height (Min).............................. 940 mm
Weight of Heaviest Part........................... 17.55 kg
Weight (kg)....................................... 20.85 kg
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see www.ilcaustralia.org/explanationofstandards.
Place Of Manufacture
Denyers International (Australia)
Supplier Information - click to supplier for contacts details
DENYERS INTERNATIONAL PTY LTD,
MOORABBIN, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
