NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Ergoport
ILC Reference NO 64:08:004
Item sourced from ILC VIC database
Short Description
An Australian made contoured plastic support for both forearms and a keyboard. Two oval foam inserts support the forearms. The keyboard is positioned behind a raised foam wrist rest which extends across the width of the Ergoport. An area is available to the right or the left for the computer mouse and phone and a cut out area at the top provides a handle for transport.
More Details
Installation
1. Clear a flat space approximately 120cm by 80 cm in front of your keyboard.
2. Clean this area with a damp cloth and allow to dry.
3. Before affixing the Ergoport to the desktop ensure you select the best position.
4. The top of the Ergoport should be in line with usual screen position.
5. The concave section of the Ergoport should be in line with the edge of the desk.
6. Once the correct position has been selected, draw the outline with a pencil.
7. Turn the Ergoport over and remove the upper adhesive strip from the hook and loop (velcro)
8. Do not separate the hook and loop (velcro)
9. Place the ergoport on the marked position and press down firmly
10. Place keyboard, mouse and phone on the Ergoport.
11. Leave overnight for adhesive to bond.
Australian Standards
For some types of equipment, specific Australian Standard(s) are applicable to the materials used in the manufacturing and the installation of products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with the relevant Australian Standard(s).
Safety and Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety details.
Models
Ergoport
Ergoport small
Dimensions
Ergoport
Overall Width..................................... 560 mm
Overall Depth..................................... 40 mm
Overall Length.................................... 960 mm
Load Capacity (supplier stated)................... 3 kg
Ergoport small
Overall Width..................................... 510 mm
Overall Depth..................................... 40 mm
Overall Length.................................... 850 mm
Load Capacity (supplier stated)................... 2.8 kg
Place Of Manufacture
Therapod international (Australia)
Supplier Information - click to supplier for contacts details
BACKCARE AND SEATING (BRIGHTON),
BRIGHTON, VIC
BACKCARE AND SEATING (CARLTON),
CARLTON, VIC
I.G. OFFICE AND COMPUTER SUPPLIES,
SOUTH MELBOURNE, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
