username
password
 
login panel
 
  NEW SEARCH   NEW SEARCH, STATE - VIC

Click for Printer Friendly Version of this information.
First   Prev Previous page  Next page Next   Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.



Item Details

Sunrise Medical Jay J2 Deep Contour Cushion

ILC Reference NO 43:63:018
Item sourced from ILC VIC database


Jay J2 Deep Contour Cushion

Factors to Consider
There are many things to consider when selecting pressure care products including nutrition, skin moisture, level of mobility, age, shear, friction, location of pressure ulcer (if present) and hygiene. Any comments regarding level of pressure care is a suggestion made by suppliers as a guide to assist with selection, and this may differ from brand to brand. When selecting pressure care products it is strongly advised that a comprehensive assessment is undertaken by a health professional to encourage correct product selection and monitoring of product effectiveness.
Jay cushions are designed to fit the individual dimensions of the user. Sunrise Medical are able to add foam rails to their Jay range of cushions to extend seat width or depth. This may assist if the dimensions of the user and the wheelchair vary. This can be completed at no additional cost at time of ordering.


Short Description
This cushion consists of a contoured foam base with a Jay Flow pad overlay. The manufacturer states it is designed for a user at high risk of skin breakdown. It features a deeper rear well than the standard J2 cushion and enhanced contours to assist positioning. A layer of foam is featured underneath the overlay, as well as along the sides of the cushion to provide support to the hip region.



Price Guide
Refer to supplier details for pricing.


More Details
Deep Contour Base
This is made from moulded fluid resistant foam. It is a closed cell foam.
The front of the base has a bevelled edge to accommodate contractures.
The base is slip resistant.
This cushion can be placed on a solid drop in seat or solid seat insert.
The seat well is designed to be longer and it narrows towards the rear to enhance stability.

Fluid Pad Overlay
The pad overlay is divided into 3 sections incorporating a left and right fluid pad and a section designed for the coccyx region.
76mm (3 inches) of Jay Flow fluid is featured in the pad overlay to facilitate immersion into the cushion.
The overlay pad is attached to the foam base by colour coded hook and loop fastening.
The fluid in the pad maintains viscosity at low and high temperatures for consistant sitting stability.

Cover
Stretch fabric cover with pleating design to reduce surface tension.
A handle is featured on the front edge of the cover.

Sizes
There is a range of standard sizes from 360mm (14 inches) wide and 360mm deep to 580mm (24 inches) wide to 460mm (18 inches) deep.
Cushion sizes may be customised.

Accessories
Lateral thigh supports.
Medial thigh supports.
Fluid supplement pads.



Models
Only one model available



Dimensions
Jay J2 Cushion
Seat Width........................................ From 360 mm to 580 mm
Seat Depth........................................ From 360 mm to 460 mm
Overall Height (Min).............................. 114 mm
Load Capacity (supplier stated)................... 113 kg
Weight (kg)....................................... From 1.72 kg to 4 kg


Cleaning Requirements
The cushion cover may be turned inside out and machine washed on a warm cycle and tumble dried on a low heat setting.
The Jay fluid pad may be wiped clean with warm water and towel dried. It should not be submerged in water, as water may be absorbed into the foam via air vents on the top of the pad.
The foam base may be wiped clean and towel dried.



Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.



Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see www.ilcaustralia.org/explanationofstandards.



Place Of Manufacture
Sunrise Medical (USA)



Display Information
ILCVIC may have this item on display. If you want to view or trial this product, please contact ILCVIC on 03-9362 6111 to ensure that it is still on display prior to your visit.

Supplier Information - click to supplier for contacts details
AUSMEDIC/METRON,   CARRUM DOWNS, VIC
BELLEVUE MEDICAL,   ALBURY, NSW
DYNAMIC WHEELCHAIR SOLUTIONS,   CLAYTON, VIC
GEELONG WHEELCHAIR SERVICE PTY LTD,   GROVEDALE, VIC
LIFEHEALTHCARE (PREVIOUSLY L & R) ALBURY,   ALBURY, NSW
LIFEHEALTHCARE (PREVIOUSLY L & R) BRUNSWICK,   BRUNSWICK EAST, VIC
LIFEHEALTHCARE (PREVIOUSLY L & R) CHELTENHAM,   CHELTENHAM, VIC
LIFEHEALTHCARE (PREVIOUSLY L & R) GEELONG,   GEELONG, VIC
LIFEHEALTHCARE (PREVIOUSLY CENTRAL VICTORIAN) BENDIGO,   BENDIGO, VIC
LINDS REHABILITATION EQUIPMENT - BENDIGO,   BENDIGO, VIC
LINDS REHABILITATION EQUIPMENT - GIPPSLAND,   SALE, VIC
LINDS REHABILITATION EQUIPMENT - HALLAM,   HALLAM, VIC

Additional /images
No additional /images apply to this item

First   Prev Previous page  Next page Next   Last

page spacer