NEW SEARCH NEW SEARCH, STATE - VIC
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Relax Gelcell G2 Wheelchair Cushion
ILC Reference NO 43:62:032
Item sourced from ILC VIC database
Factors to Consider
There are many things to consider when selecting pressure care products including nutrition, skin moisture, level of mobility, age, shear, friction, location of pressure ulcer (if present) and hygiene. Any comments regarding level of pressure care is a suggestion made by suppliers as a guide to assist with selection, and this may differ from brand to brand. When selecting pressure care products it is strongly advised that a comprehensive assessment is undertaken by a health professional to encourage correct product selection and monitoring of product effectiveness.
The pressure reducing effectiveness of this cushion may be affected if the user does not sit in a symmetrical position. The user should be checked and monitored for bottoming out on this cushion.
This cushion needs to be maintained so the inflation level is not so low that the user is touching the surface under the cushion.
This cushion can get punctures, so may need repairs.
The movement of the cells and fluid gel can help reduce shear for those at risk of pressure ulcers.
The cover has a slip resistant base to reduce movement of the cushion during transfers and while changing position in the wheelchair.
This cushion has a low weight, which may be beneficial for lifting, or to keep the weight of the wheelchair down.
The supplier states this cushion is suitable for users at high risk of developing pressure ulcers.
Short Description
A wheelchair cushion made up of 48 air filled cells, each covered with a layer of silicon based gel. The cells are split into two separate air chambers allowing the air pressure to be adjusted differently on either side of the cushion. In addition, the cells towards the rear are contoured. When pressure is applied to the cushion, air circulates to each of the air cells to distribute the users weight evenly. The gel layer helps maintain body temperature and reduces the risk of shear and friction. Inflation is done through two separate valves using a pump and then deflated to a suitable level. Available in three sizes.
Price Guide
Refer to supplier details for pricing.
More Details
Adjustment
This cushion can be altered in degree of inflation by inflating it with the pump provided.
Method of Use
The cushion should be inflated until it is hard to touch.
Squeeze each valve to release air until no further air flows out.
Ensure the cushion is positioned with the valves to the rear of the chair.
Sit the user on the cushion.
Pinch the valves again and release air for approximately two seconds or until the user feels the most comfortable pressure. As air is released, the cushion will conform to the shape of the user.
Place your hand under the area of most bony prominence. The distance between the users bony prominence and the bottom of the cushion should be no less than 15mm.
The cushion should be properly inflated.
Check the level of inflation on a regular basis.
Models
Gelcell G2 16
Gelcell G2 17
Gelcell G2 18
Dimensions
Gelcell G2 16
Seat Width........................................ 400 mm
Seat Depth........................................ 400 mm
Overall Height (Max).............................. 40 mm
Load Capacity (supplier stated)................... 130 kg
Weight (kg)....................................... 1.5 kg
Gelcell G2 17
Seat Width........................................ 430 mm
Seat Depth........................................ 430 mm
Overall Height (Max).............................. 40 mm
Load Capacity (supplier stated)................... 130 kg
Weight (kg)....................................... 1.6 kg
Gelcell G2 18
Seat Width........................................ 460 mm
Seat Depth........................................ 460 mm
Overall Height (Max).............................. 40 mm
Load Capacity (supplier stated)................... 130 kg
Weight (kg)....................................... 1.6 kg
Warranty
12-month warranty.
Maintenance
Refer to the supplier and manufacturer manual for maintenance instructions and safety warnings.
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information on what standards the equipment may need to meet, see www.ilcaustralia.org/explanationofstandards.
Place Of Manufacture
Trulife Healthcare (Ireland)
Display Information
ILCVIC may have this item on display. If you want to view or trial this product, please contact ILCVIC on 03-9362 6111 to ensure that it is still on display prior to your visit.
Supplier Information - click to supplier for contacts details
LINDS REHABILITATION EQUIPMENT - BENDIGO,
BENDIGO, VIC
LINDS REHABILITATION EQUIPMENT - GIPPSLAND,
SALE, VIC
LINDS REHABILITATION EQUIPMENT - HALLAM,
HALLAM, VIC
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
