NEW SEARCH NEW SEARCH, STATE - SA
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Unwin Three Point Double Mertia Reel Harness
ILC Reference NO 51:49:154
Item sourced from ILC SA database
Short Description
A restraint system for a wheelchair user consisting of mounting points on the floor and side wall of the van. Floor and wall tracking need to be installed into the vehicle. Tracking and straps can be customised to accommodate a variety of wheelchair dimensions in multi user situations. The inertia reel forms a lap and diagonal restraint. The unit retracts when not in use.
Price Guide
Refer to supplier information for pricing details.
Features
This three point wheelchair occupant restraint is used whenever a person travels seated in the wheelchair. It is used in conjunction with a wheelchair restraint. It is suited for use with all common makes of wheelchair. It can only be used in vehicles where tracking has been
installed on the floor and wall of the vehicle (above shoulder height). The Double Inertia Reel comprises a single strap with an inertia reel at each end. It forms a lap and diagonal restraint, the belt retracts into the reel when not in use and this in turn can be stored. An adjustable strap clips onto the wall mounted tracking and then into the diagonal part of the Double Inertia Reel.
FLOOR ANCHOR POINTS - Three types of aluminium floor tracking is available. Two are recessed into the floor, the Heavy Duty Rail and Low Profile Rail. Surface Rail is fitted above the floor. (Surface Rail is recommended as the choice for the wall mounting, an adjustable strap is clipped into this.)The tracking is placed on the floor longitudinally. The Double Inertia Reel and the Stalk, with belt buckle are anchored to the floor tracking via clips.
RESTRAINT OF WHEELCHAIR - A choice of wheelchair restraints is available and are required to be used in conjunction with wheelchair occupant restraints. The wheelchair restraint is also anchored onto the floor tracking via clips.
RESTRAINT OF OCCUPANT - A lap sash belt, with three points of attachment : the Double Inertia Reel unit and the Stalk unit with the belt buckle point are anchored to the floor tracking behind the wheelchair and occupant. The adjustable strap which is clipped to the wall
mounted tracking above the occupants shoulder also attaches to the diagonal part of the Double Inertia Reel.
Method Of Use
1. Position and restrain the wheelchair.
2. Clip the double inertia reel unit and the seat belt buckle stalk into the floor tracking.
3. There are two clips on the belt. Pass the first one around the pelvis and fit into the floor mounted stalk. The second attaches to the wall mounted belt.
4. Adjust the length of the wall mounted belt to pass over the shoulder.
Caution
The webbing should be checked regularly for signs of wear or fraying. Nicks greater than 1mm necessitate replacement. The product must be replaced immediately after it has been worn during a collision. No restraint system is considered safe to use with the occupant of a scooter travelling while sitting in the scooter. The occupant must transfer to a normal vehicle seat for the journey.
Additional Comment
When purchasing a vehicle wheelchair restraint, consider also other vehicles in which the person may travel in their wheelchair (eg taxis, school bus etc.). This may influence the choice of restraint which is chosen for the family / individual's vehicle, as not all restraint fittings or modifications that are required on a wheelchair are compatible with all restraint systems.
Standards
For some types of equipment, specific Australian Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Australian Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Australian Standard(s).
Place Of Manufacture
United Kingdom
Supplier Information - click to supplier for contacts details
TL ENGINEERING,
BAYSWATER, WA
Additional /images
No additional /images apply to this item
First
Prev
Last
