NEW SEARCH NEW SEARCH, STATE - NSW
Next
Last
DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.
Item Details
Contessa 1000 Residential Lift
ILC Reference NO 44:45:012
Item sourced from ILC NSW database
Short Description
The Contessa lift is an electrically operated fully automatic lift with its own space saving aluminium shaft. Holds approximately one wheelchair user and three standing people. Suitable for residential or disabled access. The lift can travel up to seven metres with up to five stops. Suitable for indoor use. Can be retrofitted or installed in new buildings.
Price Guide
Approx Price: $45,000.00
Price Date: 11/12/2008
From $45,000
More Details
. Soft start and soft stop
. Low noise levels
. Speed 0.15m/sec (approx)
. Low resonance Eco Screw Drive located within the shaft.
. Smaller space requirement because it comes with its own shaft
. There is no requirement for a separate machine room or cabinet.
PASSENGER CAR
. 270kg carrying capacity can be increased to 340kg
. Maximum of two entrances (front, back or side)
. Standard finish - 'Off White' melamine on MDF
. Recessed down lights that also operate as emergency lights
. Recessed emergency telephone
. Stainless steel hand rail
. Stainless steel control panel with a keyed on/off switch, stop button, emergency alarm button and push button for each landing
LANDING DOORS
. Hinged wooden doors with stainless steel pull handle and push plate
. Each landing has an electro mechanical interlocking device that prevents the door from being opened when the lift is not at that landing
. Concealed hydraulic door closers
SAFETY
. The lift can only descend when driven down. Cannot accidentally fall.
. Emergency battery (UPS) lowering of the car in the event of household power failure.
Models
. Single Entry
. Through Car Entry
Options
. Aluminium framed doors fitted with laminated safety glass
. The standard car size of 900mm x 1300mm can be varied
. The car walls can be customised: timber laminates, stainless steel
. Powered door openers and closers
. Car doors
Installation
Requires professional installation. A pit is not essential. Can be craned in or disassembled for retrofitting. Having its own shaft allows for easy installation into a building.
In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee of $65 is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).
It is compulsory that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.
Request further details from the supplier or contact WorkCover Plant Registration Unit.
It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.
Standards
Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).
Design registered to AS1735 Par 18: Passenger lifts for private residences
Place Of Manufacture
Europe
Dimensions
Internal carriage width 900mm
Internal carriage depth 1300mm
Maximum travel distance 7m
Load capacity 250kg (can be increased to 340kg) supplier stated
Supplier Information - click to supplier for contacts details
MASTER LIFTS PTY LTD,
KIRRAWEE, NSW
Additional /images
No additional /images apply to this item
First
Prev
Next
Last
