Product Search - Concord Pal Vertical Wheelchair Platform Lift

Next Last

DISCLAIMER:
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre (ILC) is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILC for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.

Item Details

Concord Pal Vertical Wheelchair Platform Lift

ILC Reference NO 44:45:005
Item sourced from ILC ACT database

Short Description
A vertical wheelchair platform lift available in four models, with six lifting heights for indoor and outdoor applications. It is battery powered and has a cable hydraulic drive system. If this lift is to be installed in a public building it must comply with the relevant Australian Standard.

Price Guide
Refer to supplier details for pricing.

More Details
STANDARD P.A.L. FEATURES:
. Emergency battery powered lowering and raising
. Smooth and quiet 1:2 cable hydraulic drive system
. Aluminium car frame with baked polyester electrostatic paint finish
. Emergency manual lowering device
. Slack cable safety drive
. Skid-resistant flooring
. Automatic battery recharging system
. Detachable platform base and sling
. Emergency cab light
. Cab handrail
. Fixed or flip-up ramp
. Choice of two platform sizes - 890 x1220mm or 890 x 1372mm

LIFT SPECIFICATIONS:
. Power 110 volt coverted to 24 volt DC
. Drive Type 1:2 cable hydraulic
. Rated Load Capacity 341 kg
. Platform Dimensions (clear) 1372 mm L
. Emergency Backup - Battery operation and down direction device
. Control System Key controlled constant pressure
. Rated Speed .08 m/s (nominal)
. Warranty One year limited

MODEL AVAILABLE:
. S - Standard model is designed for a variety of hoistway applications.
. EN - Enclosed model is enclosed to the upper gate in plexiglass or steel.
. SE - Semi-Enclosed model is enclosed the upper landing.
. EXT -Exterior model is designed with added features for exterior use.

Options
. 1.5 hour, UL Listed fire-rated doors
. Custom finishes in stainless, glass or bronze
. Domes for enclosure models
. (EXT) exterior weather resistant package
. Gates, doors and bridges
. Platform length of 1524 mm
. Ninety degree or side load platforms
. Automatic and fixed ramps
. Automatic gate and door openers
. Call / send controls at landings for carer use
. Portable units
. Custom colors in baked polyester finish

Models
. S - Standard model is designed for a variety of hoistway applications.
. EN - Enclosed model is enclosed to the upper gate in plexiglass or steel.
. SE - Semi-Enclosed model is enclosed on the upper landing.
. EXT -Exterior model is designed with added features for exterior use.

Installation
In the ACT, the Scaffolding and Lifts Regulation 1950 requires the installer of the lift (the Lift Company) to submit a 'Notice of Intention to Erect or Alter a Lift'. This applies to all lifts including service lifts and disabled access lifts. All lifts that are installed in the ACT need to comply with the current Lift Code of Australia.

Once the lift is erected, the lift company will contact WorkCover to arrange a "pre-commissioning inspection and test " on the lift (both new and upgraded). WorkCover charges an initiation fee of $39.10 plus $26.65 per hour for this service. (This fee is revised regularly). There is no requirement for the owner to arrange an annual inspection. For more information, contact ACT WorkCover on 6205 0200.

Information correct April 2007

Dimensions
Overall Length (mm)     1291 - 1523
Load Capacity  (kg)      341
Max. Range     (m)      1.22 -  4.27
Lift Speed     (m/sec)     0.08

Platform size  (mm)     890 x 1220
                        890 x 1372

Additional Comment
. Designed for commercial and residential use.
. Each model has a choice of 6 maximum lifting heights from 1220 mm to 4270 mm.
. A video "Concord. Innovation in Mobility" demonstrates the features of this product.

Place Of Manufacture
CONCORD (USA)

Supplier Information - click to supplier for contacts details
ACCESS ELEVATORS AUSTRALIA PTY LIMITED,   WETHERILL PARK, NSW

Additional /images
No additional /images apply to this item

First   Prev Next   Last